Buggy 1:8 RTR Kyosho Inferno Neo 3.0 VE brushless readyset - green Power and acceleration test the limits of common sense in a buggy that also offers easy control Kyosho Inferno NEO 3.0 VE RTR, offers incredible acceleration covering 0-50 m in 3.5 seconds; With its great reputation gained on the racing scenes around the world, the Inferno Neo 3.0 VE uses a powerful combination of brushless motor and ESC. The reliable Syncro KT-231P+ transmitter offers vastly improved control and features fine setting adjustments with throttle end-point adjustment, dual speed governor, as well as handling a model-installed high-torque, high-speed servo. The powerful KYOSHO SPEED HOUSE Torx8 brushless motor and Brainz8 ESC combine with large bore oil filled shock absorbers and KC Cross tires to deliver superior performance on any surface. Features : * Fully pre-assembled model can be ready to use on the day of purchase. Permanent 4WD transmission, with 3-differential transmission, "Big Bore" oil shock absorbers and independent double wishbone suspension on 4 wheels. Assembled with 18 ball bearings on the drive system. Suspension arms with high torsional stiffness. Availability of a wide range of optional parts to increase performance. * 1.0 modulus metal main crown, designed for durable and long-lasting operation. * Front and rear bevel gears in high resistance metal and differential gears in metal, for high reliability. Technical characteristics: Length : 496mm Width: 307mm Height: 189mm Wheelbase: 323～328mm Track: (A/P) 258mm／261mm Wheels (A/P) φ115×44mm／φ115×44mm Ratio: 12.71 Weight: approx. 3,550g Transmitter 2.4 GHz Syncro KT-231P+ handwheel; Equipment required for use: 4 AA type alkaline batteries (stylus) Lipo battery for 2S 4000 mah Lipo motor or more x2 Battery charger Large and small Phillips screwdriver.
REDEFINING 1:8 TRUGGY STANDARDS: Just as T-Maxx, Revo, Slash, TRX-4, X-Maxx and Maxx have improved and defined their categories, Sledge redefines the 1/8 scale off-road category. Sledge offers solutions designed by Traxxas to satisfy the desire for superior performance, greatly improved durability and premium quality. Thousands of hours of engineering, design and testing have shaped a Truggy built to the highest standards Traxxas could muster! DESIGNED AND BUILT TO A HIGHEST STANDARD: Traxxas got the Sledge right out of the box, spending thousands of hours testing eliminating weak points before it went into production. The result is nothing short of perfection. Sledge is unique and designed from the ground up to meet the needs of the 1/8 scale segment. MODERN DESIGN: Sledge is purpose-built for today's customers with a frame designed to dominate skate parks and freestyle ramps. the unique clipless body system resists high-speed rollovers and imperfect landings and still removes in seconds. Sledge's tight tolerances and oversized components provide the precision of the racing Truggy, but with great strength and durability! Ultra-Rigid Frame with Support Reinforcements Oversized Drivetrain Made Specifically for Brushless 6s Power Engineering and Design for Maximum Strength High Quality Premium Components Used to Make Parts Unrivaled Finishes and Tolerances A UNIQUE RIDING EXPERIENCE FOR ANYONE: Sledge is the perfect vehicle for anyone who wants to experience the pinnacle of Traxxas quality and superior engineering. Traxxas ushers in a new era of 1/8 scale Monster Truck 6s with legendary X-Maxx ruggedness and speed and precision not found in this segment. Sledge is the ideal companion for those who already own an X-Maxx, who are looking for a little more speed, or even for Maxx owners who want even more power. FRAME STRUCTURE: Craft the strongest aluminum frame in the 1/8 scale segment. The frame structure is made up of triangle supports and reinforcements that are anchored to the frame at several different points. To increase strength there is also an aluminum T-bar as long as the frame. This way the Traxxas Sledge is much more robust and rigid right where you need it! Three rear supports with 4 anchoring points Front reinforcement support with 2 anchoring points Flaring on the reinforcement frame present at the front and rear Reinforced and slightly curved frame edge Various trellis supports in several points of the frame to give strength where it is needed DESIGNED FOR 6S LIPO BATTERIES: Sledge is the only Truggy in this category to have a drivetrain sized appropriately for 6s brushless power. Bigger gears. More steel. Basically bombproof. Compare the underpowered transmissions of other competing cars, those are not suited to today's needs and 6s power systems. The oversized center differential is loaded with extra-thick differential oil for punchy performance that other competitors can't match. Their center differentials are much freer to overload the front tires and safeguard the drivetrain. Central half-shafts in reinforced steel with greased joints and covered by a rubber gasket for greater resistance to wear and to maintain lower working temperatures. Half-shafts at the wheels in reinforced steel with CVD constant velocity at the front. "CLIPLESS" BODY FIXING SYSTEM: L The Traxxas Sledge's innovative quick release body system is a game changer designed for ease of use and to protect the integrity of the body itself. It can be installed without a hitch and snaps into place in seconds. The patented "clipless" solution supports and protects the entire bodywork. It installs with a satisfying *click*. Practical and simple! VELINEON VXL-6s BRUSHLESS SYSTEM: The most powerful 6s power system ever!! This VXL-6S features completely new tuning parameters specific to the 2000kV motor. More efficient components and electronics result in extra mid-throttle push and pull that you can feel and feel. Traxxas thus provides more power under torque! TQi RADIO SYSTEM: The TQi radio system offers excellent feel and control with integrated Traxxas Stability Management. Full compatibility with the free Traxxas Link App via the optional wireless module provides comprehensive tuning and integrated telemetry. Technical Specifications of the TQi system: TSM level adjustable in real time Highly ergonomic high level radio handle 30 programmable memories With the TSM (traxxas stability management) you can easily "tame" the incredible power and speed of the 6s brushless system Monitor in real time the engine rpm, speed and temperature of the regulator via the Bluetooth module Optional art. TXX6511 sold separately 347 HIGH-TORQUE STEERING SERVO: The Traxxas Sledge is equipped with the new high-performance 2275 metal gear servo, which has 50-80% more torque than the competition! No updates will be necessary! This avoids failure on the weak servo control! Torque 25 Kg/cm at 6V Torque 35 Kg/cm at 7.4V Aluminum central case for better cooling and long-lasting performance Reinforced steel gears ALUMINUM ENGINE MOUNT: Superior engineering has led to an aluminum engine mount at -spindle with fixed positions for crown-pinion coupling. Zero flexibility. No engine movement. An integrated fan mount allows for the installation of an optional cooling fan if desired (item TXX3467 available separately). Full chassis contact mount eliminates flex and dissipates heat through the chassis. "SNAP-LOCK" BATTERY RESTRAINTS: Hook and loop battery retaining straps are messy, frustrating and take time away from your riding enjoyment. Traxxas engineering solves this problem with the proven snap-lock solution that holds and protects batteries securely. Designed to protect your batteries! The snap lock opens and closes in seconds. The hard tray offers complete protection for battery packs. REINFORCED “C” CASTER BLOCKS: Sledge uses an all-new front suspension with “C” caster blocks instead of traditional pivot balls. While pivot balls are at home on a track and are perfect for a race-inspired Truggy like the E-Revo, they are not the ideal solution for modern 1/8 scale Monster truck use. The Traxxas pivot ball suspension used in the Revo and E-Revo features patented designs that reduce maintenance and maintain tolerances. However, the Traxxas Sledge has steel bushings to prevent wear and ensure long-lasting performance. Reinforced hardened steel suspension pins are secured with locknuts. SINGLE-PIECE FIXED TIE-RODS: Adjustable tie-rods are right to use for track competitions, but fixed one-piece camber and convergence tie-rods are the definitive solution for extreme durability if the model car is used for fun and "bashing" . No more breaking or adjusting is necessary with these sturdy tie rods. The tie rods always connect to other parts of the Traxxas Sledge with a double anchor, so they don't come loose or tear. One-piece tie rods eliminate breakage of uniball joints Double anchoring for tie rods Camber and toe settings do not change even after extreme freestyle READY FOR TRACK PERFORMANCE: Sledge already offers track-worthy handling thanks to the superior design and ultra center of gravity Bass. But for racers who want to hit the track, genuine Traxxas accessories combine Traxxas durability with precise tuning. Available as optional parts sold separately will be: Adjustable camber and toe rods in colored aluminum, oversized and with reinforced joints A range of anti-roll bars of varying hardness SLEDGEHAMMER TIRES: The premium motocross-inspired Sledgehammer tires are equipped with high-quality sponge inserts that resist wear or breakage. The new innovative bonding technology radically improves the bond between tire and rim. This allows riders to get the most out of their tyres. Stress and wear your tires until they are slick without worrying about tears or scuffs. Premium sponge resists wear and tear Thick rubber casing prevents cracking and ensures longer life Improved bonding process provides adequate durability for 6s power Aggressive Motocross-inspired tread pattern for maximum traction on every type of surface SUPERIOR WATERPROOFNESS: There is a difference between waterproof and water resistant. Sledge continues the Traxxas legacy with patented best-in-class waterproofing of any 1/8 scale Monster Truck 6s. THOUSANDS OF HOURS OF TESTING AND DEVELOPMENT: In addition to design and engineering, Traxxas invests significant time and resources in testing new products before they are released to market. Traxxas Sledge has undergone literally thousands of hours of testing to prove its durability and performance. We don't leave it up to our customers to find design flaws. FINISHES AND TOLERANCES: The tolerances, finishes and attention to detail on the Traxxas Sledge are exceptional. The parts are beautifully integrated, formed and assembled with precisely held tolerances. Cables are also properly hidden and managed for protection. Features: 3.2mm Precision Frame T-Bar Center Reinforcement Bar Reinforced Steel Gearbox Designed for 6s Power 25Kg High Torque Metal Gear Servo Control VXL-6S Brushless Electronic Controller 2000Kv Velineon Brushless Motor 6.7" Sledgehammer Tires Extreme CLIPLESS body fastening system Battery compartment with snap closure GT-Maxx aluminum shock absorbers TQi 2.4GHz radio system with TSM Speed over 112 km/h with 6S batteries and optional gears Necessary accessories not included: Necessary battery: TWO 3S Lipo 5000mAh, or UNA Lipo 4S 6700mAh: Traxxas Li-po Battery 11.1V 5000mAh 25C connector Traxxas ID (art. TXX2872X) Traxxas Li-po Battery 4S 14.8V 6700mAh 25C connector Traxxas ID (art. TXX2890X) Traxxas Li-po Battery 7.4V 7600mAh 25C 2S Traxxas Power Cell iD connector (art. TXX2869X) Lipo battery charger: Traxxas EZ Peak Plus 4 Ampere Ni-Mh / Li-Po battery charger with ID Technology (art. TXX2970G) Traxxas EZ Peak Live Bluetooth 12Amp battery charger Ni-Mh / Li-Po with ID technology (art. TXX2971G) Traxxas EZ Peak Dual 8Amp Ni-Mh / Li-Po battery charger with ID technology (art. TXX2972G) Traxxas EZ Peak Live Dual ID Bluetooth 16Amp Ni-Mh / Li-Po battery charger with ID technology (art. TXX2973G) Technical data sheet: Length 604mm (Including Wing) Width 459mm Chassis Height From Ground 50mm Total Height 214mm Product Weight 5.77Kg Wheelbase 384mm Front Shock Absorber Length 128mm Rear Shock Absorber Length 144mm Transmission Module 1.0 Dp Maximum Speed 112km/h (with Lipo 6S) Battery required: Two 5000mAh Lipo 3S, or a Lipo 4S 6700mAh Electronic Regulator Velineon VXL-6STM (Art. TXX3485) Voltage 4S-6S LIPO TRAXXASS TRAXXAS ID MOTOR VELINEON 2000KV Brushless Transmission 4WD With Center Dim With TSM Receiver External Rubber Diameter 170mm X 84mm
VRX RH818 Truggy COBRA 4WD Electric Brushless RTR 1/8 Scale. The 1/8 Truggy from VRX changes face, it presents itself in a gritty and super performing Brushless version. Speed and dexterity are its strong points. Thanks to its huge wheels it makes space on any surface. Powerful electronics and light weight make the Truggy COBRA one of the fastest models of its kind. 2000Kv engine with heat sink and cooling fan supported by an 80A Esc Regulator, all completed by a nice 11.1v 3300mah battery. Thanks to these features, fun is guaranteed ... obviously not forgetting the robustness of the mechanics studied in the smallest details. Mechanical parts mounted in metal to make the model safe on impacts, in fact, the upper frame and the front and rear reinforcements of the arms are in blue ergal. Just a first glance is enough to be fascinated by its aerodynamics. A low-slung body with a tapered nose. A great team effort is made by the spoiler that does its job impeccably. Details not to be overlooked: Adjustable metal engine bridge, 4 oil shock absorbers with adjustable metal ring, front constant velocity shock absorbers, fully ball-bearing model, programmable speed regulator with cooling fan, possibility of any type of adjustment (camber, convergence, balancing). In short, an impeccable model that leaves room for fun and passion for model makers. DATA SHEET: - Motor: Brushless 3660 2000KV BL sensorless - Regulator: Esc 80A sensorless - Battery: 3300KV 11.1V Li-Po - Charger: V3 Li-Po - Directional servo: 6KG - Radio frequency: 2.4Ghz 2 channels - R/C Model Car Measurements: 485*340*190mm(L*W*H) - Wheelbase:325mm
Kyosho Mp10e electric readyset ready to run green, 1:8 scale cod.34113t1. Features: - Fully assembled model car - 4-wheel drive - Extremely low center of gravity - Weight balance designed for maximum performance - High-quality components - Easy and high-performance basic setting - Permanent 4-wheel drive - Three high-capacity differentials - Fully ball-bearing metal transmission - Adjustable BigBore aluminum shock absorbers - Front and rear stabilizer bar - Lexan body designed for greater aerodynamics Technical characteristics: - Length: 490 mm - Width: 307 mm - Height: 180 mm - Track: 254 mm - Wheelbase: 325 mm - Weight: 3,370 g Package contents: - Inferno MP10e assembled - KT-331P 2.4 GHz transmitter with LCD screen - Mp10e TKI2 painted body (green) - Quality electronics with KV2300 brushless motor with BRAINZ 8 ESC - K-Blox tires that offer exceptional grip Accessories not included, required to use the model: - 4 AA batteries for the transmitter - 2 batteries for the model 7.2 Ni-MH or 2x Lipo 7.4V - Suitable charger
