EXTRA LIQUID GLUE FOR PLASTIC 40 ML, attention: use in well-ventilated areas, contains Acetone and Butyl Acetate, avoid inhaling and coming into contact with eyes and skin. in case of contact, rinse thoroughly with water and contact your doctor and the nearest poison control center. Keep out of reach of children
CYANO LIQUID GLUE 20 GR It can cause skin irritation, it can cause serious eye irritation, keep out of the reach of children, do not breathe, use in a well-ventilated place, wear protective goggles for use, if it comes into contact with the eyes, rinse generously for several minutes, if present and if possible remove contact lenses, call a doctor or poison control center.
LIQUID GLUE FOR PLASTIC WITH TAMIYA BRUSH 20 GR WARNINGS: glue for plastic models, contains acetone, keep out of the reach of children. Use in properly ventilated places. Do not inhale and do not ingest.
GLUE FOR PLASTIC WITH 25 GR NEEDLE IDEAL FOR ASSEMBLY KIT. WARNINGS: liquid glue for adult model makers (+14). WARNING : FLAMMABLE Contains butyl acetate. Danger: flammable liquids and vapours. May cause drowsiness and dizziness. Keep the product tightly closed, away from: children, sources of heat and ignition. Not smoking. Avoid contact with skin, eyes, mouth. In case, rinse with plenty of water. Do not inhale vapours. Use in a ventilated environment. If swallowed, contact a poison control center/emergency room. Use appropriate equipment. manufactured by revell Gmbh. Plastic collection: check the provisions of your municipality.
GLUE 21 CYANOACRYLATE MEDIUM DENSITY 21 GR. WARNINGS: DO NOT INHALE, IT MAY CAUSE SKIN IRRITATION, DANGEROUS FOR THE EYES, IT IS RECOMMENDED TO WEAR PROTECTIVE GLOVES AND GOGGLES DURING USE, USE IN A WELL VENTILATED AREA, IN THE EVENT OF CONTACT WITH THE EYES, RINSE THOROUGHLY FOR SEVERAL MINUTES WITH WATER REMOVE YOUR CONTACT LENSES IF POSSIBLE. IN CASE OF CONTACT WITH EYES OR IF SWALLOWED, CALL A DOCTOR OR A POISON CENTER.
SUPERFINE TWO-COMPONENT FILLER.
Mix equal quantities of the two sticks by rolling and kneading forat least 7 mins. This is most important when mixing Superfine White Milliput as the sticks are the same colour. Milliput becomes rock hard in 3-4 hours at normal room temperature. Store in cool, dry conditons. Always advisable to wear gloves.
SOME USES OF MILLIPUT: MODELLING, SCULPTING AND WOODTURNING, RESTORATION OF PORCELAIN AND OTHER CERAMICS. SUITABLE FOR REPAIRS TO UPVC AND FOR CHIPS IN BATHS, SINKS AND TILES.
WARNING: KEEP OUT OF THE REACH OF CHILDREN, MAY CAUSE AN ALLERGIC SKIN REACTION.
MR.CEMENTS MR HOBBY 40ML. LIQUID GLUE FOR PLASTIC TO BE USED FOR STATIC MODEL MAKING. THE PRODUCT IS FLAMMABLE AND HARMFUL TO THE ENVIRONMENT. DO NOT INHALE, DO NOT INGEST, USE IN A WELL-VENTILED PLACE AND KEEP OUT OF THE REACH OF CHILDREN. CREATES GREAT IRRITATION TO THE EYES, USE WITH PROTECTIVE MEANS. CONTACT A DOCTOR IMMEDIATELY IF YOU HAVE EYES OR SWALLOWED
TAMIYA EXTRA THIN CEMENT QUICK SETTING. GLUE FOR PLASTIC CAUTION EXTREMELY FLAMMABLE, HARMFUL VAPOURS. CONTAINS ACETONE, KEEP OUT OF THE REACH OF CHILDREN, USE IN PROPERLY VENTILATED PLACES, DO NOT INHALE, DO NOT INGEST
Tamiya Limonene cement extra thin 40 ml. TAMIYA EXTRA LIQUID PLASTIC GLUE, LEMON SCENTED, CONTAINS ACETONE, KEEP AWAY FROM THE REACH OF CHILDREN, USE IN WELL-VENTILATED PLACES, DO NOT INHALE THE VAPORS, DO NOT INGEST.
BINDAN -RS EXPRESS 250G, STRONG GLUE FOR WOOD, PAPER, CANVAS, LEATHER, FELT WITHOUT SOLVENTS 100% pure, quick-setting vinyl product, resistant to humidity. No presses or clamps are needed. Glued joints must be joined within 5 minutes. USE: Glues quickly (3-5 minutes) with light manual pressure all types of wood, paper, canvas, felt, laminates, glass, concrete, leather, polystyrene, etc. once dry it is transparent
CYANO ROKET ODOURLESS 20G CRYSTAL CLEAR, FOAM-SAFE, NON-BLOOMING CYANO GLUE, BONDS 10-20 SEC. DELUXE MATERIALS .CYANOACRYLATE DANGER, GLUES THE SKIN AND EYES IN A FEW SECONDS, KEEP OUT OF THE REACH OF CHILDREN
Foam 2 Foam (50ml) Manufactured by DELUXE Materials - Code: DELUX-AD34 FOAM 2 FOAM Deluxe Materials AD34 for quickly shaping foam. Glue with very high adhesion, great hold, flexible, ideal for foam model aircraft. Glue: Depron, white, blue and EPO foams, wood and plastic. APPLY THE GLUE AND JOIN THE TWO SIDES, COMPRESS STRONGLY FOR 10 MIN., DRY AFTER 1 OR 2 HOURS, PRECAUTIONS FOR USE: HIGHLY FLAMMABLE LIQUID AND VAPORS. TOXIC IF SWALLOWED, TOXIC ON CONTACT WITH THE SKIN, TOXIC IF INHALED, CAUSES ORGAN DAMAGE. KEEP AWAY FROM OPEN FLAMES, DO NOT SMOKING, KEEP CONTAINER TIGHTLY CLOSED, WEAR GLOVES/PROTECT YOUR EYES. IF SWALLOWED, IMMEDIATELY CONTACT A POISON CENTER OR A DOCTOR. KEEP LOCKED, IN CASE OF CONTACT WITH SKIN, WASH THOROUGHLY WITH SOAP AND WATER, STORE IN A COOL, WELL-VENTILATED PLACE. KEEP THE CONTAINER TIGHTLY CLOSED.
GLUE BUSTER DISSOLVING GLUE 28G DISSOLVES SUPER ADHESIVE GLUES, FREE GLUED SKIN, SHAKE BOTTLE, DISTRIBUTE OVER GLUED AREA AND WAIT FOR IT TO SOFTEN, REMOVE USING A CLOTH AND RINSE THOROUGHLY WITH WATER. PRECAUTION FOR USE:CAUSES SERIOUS EYE IRRITATION. WASH THOROUGHLY AFTER USE, WEAR GLOVES/PROTECT EYES. IN CASE OF CONTACT WITH THE EYES, RINSE THOROUGHLY FOR SEVERAL MINUTES, REMOVE ANY CONTACT LENSES IF IT IS EASY TO DO. CONTINUE RINSE, IF THE EYE IRRITATION PERSISTS, SEEK A DOCTOR.
TWO-COMPONENT GLUE 4 MIN 71G IDEAL FOR BALSA, WHITE METAL, HARD TRANSPARENT PLASTIC, LEXAN, GLASS AND CERAMIC, EPOXYGRP, PAINTED WOOD, FOAM, DEPRON, STYRENE, CARBON FIBER, VENEER ATTENTION CAUSES CU TANE IRRITATION, MAY CAUSE C ALLERGY UTANEA, CAUSES SERIOUS EYE IRRITATION, SUSPECTED OF DAMAGEING THE WOUNDS OR THE UNBORN CHILD. TOXIC TO AQUATIC ORGANISMS, CAUSES LONG-TERM NEGATIVE EFFECTS. AVOID RELEASE INTO THE ENVIRONMENT. WEAR PROTECTIVE GLOVES/PROTECTIVE CLOTHING/EYES PROTECTION. IN CASE OF CONTACT WITH SKIN, WASH THOROUGHLY WITH SOAP AND WATER. IN CASE OF CONTACT WITH THE EYES, RINSE CAREFULLY FOR SEVERAL MINUTES. REMOVE CONTACT LENSES IF PRESENT AND EASY TO REMOVE. CONTINUE RINSING. IF EXPOSURE OR SUSPECTED EXPOSURE: CONSULT A DOCTOR. AVOID BREATHING VAPOURS. DISPOSE OF CONTENTS ACCORDING TO LOCAL REGULATIONS
SPEED EPOXY II 20 MINUTES 224G TWO-COMPONENT EPOXY GLUE CAUTION CAUSES SKIN IRRITATION, MAY CAUSE SKIN ALLERGY, CAUSES SERIOUS EYE IRRITATION, SUSPECTED OF DAMAGEING THE WORLD OR THE UNBORN CHILD. TOXIC TO AQUATIC ORGANISMS, CAUSES LONG-TERM NEGATIVE EFFECTS. AVOID RELEASE INTO THE ENVIRONMENT. WEAR PROTECTIVE GLOVES/PROTECTIVE CLOTHING/EYES PROTECTION. IN CASE OF CONTACT WITH SKIN, WASH THOROUGHLY WITH SOAP AND WATER. IN CASE OF CONTACT WITH THE EYES, RINSE CAREFULLY FOR SEVERAL MINUTES. REMOVE CONTACT LENSES IF PRESENT AND EASY TO REMOVE. CONTINUE RINSING. IF EXPOSURE OR SUSPECTED EXPOSURE: CONSULT A DOCTOR. AVOID BREATHING VAPOURS. DISPOSE OF CONTENTS ACCORDING TO LOCAL REGULATIONS
DeLuxe AD44 DELUXE Roket Rapid. CYANO GLUE, MEDIUM VISCOSITY DRYING 5-10 SECONDS 20G CAUTION DANGER CONTAINS ETHYL-2 CYANOACRYLATE, IRRITATES THE SKIN AND EYES, KEEP OUT OF THE REACH OF CHILDREN, BE CAREFUL TO BREATH THE FUMES, USE IN WELL-VENTILATED PLACES, WEAR GLOVES AND PROTECTIVE GLASSES IF INHALED, MOVE THE PERSON TO A WELL-VENTILED AREA. IF IN CONTACT WITH THE EYES, RINSE THOROUGHLY WITH WATER FOR SEVERAL MINUTES. CONTACT A POISON CENTER AND YOUR DOCTOR.
Milliput Epoxy Resin 113.4gm.Milliput is a two-part, cold-cured, non-shrinking epoxy putty. Self-hardening. It doesn't shrink. Tough and durable. Set underwater. Electrical insulator. Resistant to water, heat and chemicals. Highly adhesive on most materials. Mix equal amounts of the two sticks by rolling and kneading for at least 7 minutes. This is more important when mixing Superfine White Milliput as the sticks are the same colour. Milliput becomes rock hard in 3-4 hours at normal room temperature. Store in cool, dry conditions. It is always advisable to wear gloves. Some uses of Milliput: modeling, wood carving and turning, restoration of porcelain and other ceramics. SUITABLE FOR REPAIRS TO UPVC AND CHIPS IN BATHROOMS, SINKS AND TILES. WARNING: KEEP OUT OF THE REACH OF CHILDREN, IT MAY CAUSE ALLERGIC REACTIONS TO THE SKIN.
Milliput Silver Grey Stucco epossidico bicomponente 113 gr. Milliput is a two-part, cold-cured, non-shrinking epoxy putty. Self-hardening. It doesn't shrink. Tough and durable. Set underwater. Electrical insulator. Resistant to water, heat and chemicals. Highly adhesive on most materials. Mix equal amounts of the two sticks by rolling and kneading for at least 7 minutes. This is more important when mixing Superfine White Milliput as the sticks are the same colour. Milliput becomes rock hard in 3-4 hours at normal room temperature. Store in cool, dry conditions. It is always advisable to wear gloves. Some uses of Milliput: modeling, wood carving and turning, restoration of porcelain and other ceramics. SUITABLE FOR REPAIRS TO UPVC AND CHIPS IN BATHROOMS, SINKS AND TILES. WARNING: KEEP OUT OF THE REACH OF CHILDREN, IT MAY CAUSE ALLERGIC REACTIONS TO THE SKIN.
Milliput Standard Two-component epoxy glue. Milliput is a two-component, cold-cured, non-hardening epoxy putty. Self-hardening. It doesn't shrink. Tough and durable. Placed under water. Electrical insulator. Resistant to water, heat and chemicals. Highly adhesive to most materials. Mix the same quantity of the two sticks by rolling them up and kneading them for at least 7 minutes. This is more important when mixing Superfine White Milliput as the sticks are the same color. Milliput becomes rock hard in 3-4 hours at normal room temperature. Store in cool, dry conditions. It is always advisable to wear gloves. Some uses of Milliput: modeling, wood carving and turning, restoration of porcelain and other ceramics. Suitable for repairing UPVC and chips in bathrooms, sinks and tiles. Caution: Keep out of reach of children, may cause allergic skin reactions.
UHU POR 40 G/50ML GLUE FOR EXPANDED POLYSTYRENE, TRANSPARENT AND RAPID, SUITABLE FOR EXPANDED MATERIALS, SUCH AS TYROPOR, ALSO IN COMBINATION WITH WOOD, METAL, PLASTER, CERAMIC, PAPER, FABRIC AND MANY SYNTHETIC MATERIALS UHU POR 40G
AMMO MIG 2058 Ultra Glue Matt for photoetching and transparent parts 40ML. High strength acrylic glue. Specially designed to fix photo-etched or transparent parts comfortably without leaving any residue whatsoever.
UHU 45630 PLUS ENDFEST 300 90m 2 X 75ML TWO-COMPONENT GLUE 300KG STORE IN A COOL, DRY PLACE. DO NOT USE AT LESS THAN 10°C. DANGER. CAUSES SERIOUS SKIN BURNS AND SERIOUS EYE INJURIES. DO NOT BREATHE VAPOURS. WEAR PROTECTIVE GLOVES AND PROTECTIVE GLASSES
UHU HART QUICK-SETTING GLUE FOR MODEL MAKING IDEAL FOR BALSA, OTHER WOODEN MATERIALS, ALSO COMBINED WITH METAL AND PLASTIC. Specific glue for wood, strong and transparent with precision nozzle. Resists model engine fuels, acids, diluted bases, greases, oil and water. Excellent for strengthening joints and tissues subject to stress or traction. Glues wood, balsa, plywood, plexiglass, celluloid, metal, glass and ceramic. WARNINGS, GLUE IS DANGEROUS AND FLAMMABLE: highly flammable liquid and vapours, causes serious eye irritation. May cause drowsiness and dizziness. In case of consultation with a doctor, keep the container and the product label available. Keep out of reach of children. Do not smoke, Avoid breathing vapours, in case of contact with eyes, rinse thoroughly for several minutes, Remove any contact lenses if it is easy to do so, Continue rinsing. Dispose of the product/container in accordance with national/local regulations. Contains methyl acetate/n-butyl acetate. Repeated exposure may cause dryness and cracking of the skin
Bostik Super strong and safe Holds up to 4 tons 3g without solvents, quick but repositionable depending on the quantity applied from 20 seconds to one minute art. 65155
VINAVIL THE UNIVERSAL ADHESIVE, particularly suitable for gluing wood, cork and related conglomerates and chipboards, paper, cardboard, fabrics, felts, leather goods and leather articles, various rigid plastic laminates, frames etc. shake the product before use. NET WEIGHT 250g CODE 116
CONSTRUCT WOOD BOSTIK ESPRESS VINYL 75G VERY FAST 4MIN. TRANSPARENT APPLICATIONS: SUITABLE FOR BONDING WOOD, WOOD AGGLOMERATES, FIBER PANELS TO THEMSELVES AND TO EACH OTHER, OF PLASTIC LAMINATES ON WOOD AND CHIPBOARDS.
CEMENT SPB MR. HOBBY MC132 BLACK GLUE NET 40 ML. MC132 Mr. CEMENT SP Black is a black Mr. CEMENT SP, therefore it has a fast drying speed and high adhesive strength. This is a “BRUSH ON” type concrete, so you have to put the plastic parts together first, then brush the concrete onto the gap between the parts. With this black colored cement, you can easily check the amount of cement applied and whether it has been applied evenly. Application on white or light-colored plastic surfaces is not recommended because the cement will be visible. Use transparent MC131 instead. Warning: Highly flammable liquids and vapours. Causes skin irritation, causes serious eye irritation. Harmful if inhaled, may cause drowsiness or dizziness. Harmful to long-lived aquatic organisms. Prolonged exposure can cause dryness and cracking of the skin or hardening. Keep out of reach of children. Keep container tightly closed. Avoid contact with eyes, skin or substances. Do not release into the environment, wear protective gloves/clothing. Protect eyes/face. IF SWALLOWED, rinse mouth, do not induce vomiting, consult a doctor immediately. If you consult a doctor, have the product container and label available. IN CASE OF CONTACT WITH THE EYES, rinse carefully for several minutes, remove any contact lenses if it is easy to do so, continue rinsing, store in a well-ventilated place. Contains 4- Methylpentan-2-one
AK INTERACTIVE AK118 Gravel and sand fixer Stone and sand glue 100 ml. A new adhesive for fixing all types of soil, gravel, small stones, sand, etc. to your bases. This special adhesive, alcohol-based, is much more effective than traditional white glue. White glue tends to leave a plastic finish on the surface, giving it an unreal look and also tends not to expand well through the material. But this new adhesive expands quickly and is absorbed by the stones and sand, saving a lot of time when fixing rubble, for example. This product is easily cleaned with alcohol, can be applied with an airbrush or brush and the drying process can be accelerated with a hairdryer or any other type of heat source. Although it is opaque when drying, on smooth surfaces it may leave a slight satin trace, however, this can be removed with a matt varnish.
Deluxe Materials AD65 Liquid Epoxy Adhesive & Glue 224g. New formula epoxy glue with fast setting. Remains clear and sandable. Tolerant to dosage errors. Bonding time 4 minutes.
CYANO 21 SLOW DRY - COLLE 21 - C070924CU - The Slow Dry Cyanoacrylate Glue Colle21 by Ammo Mig is a multipurpose anerobic cyanoacrylate glue, specially formulated to offer a slower setting. Ideal for model making and DIY, this glue is perfect for gluing erasers, gluing metal, gluing ceramics, gluing wood, gluing leather, cardboard and some plastics (except PE, PP, PTFE). Main features of the Super Glue Slow Dry 21: Slower bonding: The Slow Dry formula allows for a slower setting, thus offering more time to adjust the parts before final fixing. Ultra-adhesive and resistant: The Super Glue cyanoacrylate Colle21 guarantees adhesion for 10 to 15 seconds at continuous pressure, with a resistance of 180 kg/cm². High temperature resistance: This cyanoacrylate glue is resistant to temperatures up to 150 ° C, ensuring optimal performance even in extreme conditions. Recommended uses for Super Glue Slow Dry Colle21: Model Making and DIY Glue: Ideal for assembling models and making DIY projects with great precision. Various Repairs: Perfect cyano glue for quick and effective repairs on a variety of materials. Nail Reconstruction Glue: Can be used for repairing and reconstructing nails, offering a durable and reliable solution. Advantages of Super Glue Slow Dry Colle21: Multi-surface application: Suitable for gluing rubber, gluing metal, gluing ceramics, gluing wood, gluing leather, cardboard and some plastics (except PE, PP, PTFE). glue, we recommend using Prymer21. Resistance to harsh conditions: The Colle21 cyanoacrylate glue is resistant to water, shock and vibration, ensuring a long-lasting fixation. Precise and waste-free application: The included precision straw allows for controlled and precise application, ideal for delicate work. It can be easily cleaned by soaking it in acetone after use. Tips for using Super Glue Slow Dry Colle21: Storage of cyano glue Colle21: Super glue Colle21 must be stored at room temperature, out of direct sunlight. It is not recommended to store it in the refrigerator. Safety: This product is not intended for use by children without adult supervision. Contains substances that may cause allergies. Use with appropriate protective equipment and consult the safety data sheet. The shelf life of the Colle21 glue is one year from the time of manufacture.
CYAN GLUE 21 DENSE - COLLE 21 - C720624CU Super glue Colle21 dense - 21 g is a dense cyanoacrylate glue, specially formulated to offer a fast and resistant bond. Ideal for model making, DIY and various industrial applications, this glue is perfect for bonding a variety of materials such as rubber, metal, ceramics, wood, leather, cardboard and some plastics (except PE, PP, PTFE) Main features super dense glue thick glue: Dense cyanoacrylate formula: The dense texture of the Colle21 cyanoacrylate glue offers a solid hold and a controlled application, minimizing drips. Ultra-adhesive and fast: This cyano glue offers a rapid fixation in 15-20 seconds with continuous pressure, ensuring a solid bond. High resistance: Super glue Colle 21 dense can withstand temperatures up to 150 ° C and supports a pressure of 180 kg/cm². Recommended uses: Model making and DIY glue: Colle21 is ideal for assembling models, making DIY projects and making meticulous repairs. Various repairs: The multi-media glue is effective for bonding leather, wood, ceramics, rubber, iron, metal and some plastics (except PE, PP, PTFE). Advantages of the thick texture of Densa glue: Precise application: Thanks to its thick formula, Super glue Colle 21 Dense allows for precise application without waste. Resistance to harsh conditions: This cyano glue is resistant to water, shock and vibration, ensuring a long-lasting and reliable fixation. Easy cleaning: The precision straw provided can be easily cleaned by soaking it in acetone after use. Tips for using Colle21 Dense glue: Storing Colle21: Keep Super glue Colle 21 Dense At room temperature, out of direct sunlight. Do not store in the refrigerator. Child safety: Use this cyano glue under adult supervision. Contains substances that may cause allergies. Use appropriate protective equipment and consult the safety data sheet. The shelf life of Colle21 cyano glue is one year from the time of production. Additional products: Prymer21: To improve adhesion on materials that are difficult to bond such as certain plastics, we recommend the use of PryMer21.
JAMARA Spray Colla Astringent - 236085 - 200ml. Danger! Extremely flammable aerosol. Pressuriesed container: may burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep way from heat, hot surfaces, sparks, open flames and other ignition source. Do not pierce or burn , even after use. Protect from sunlight. Do not expose to temperatures exceeding 50°C/ 122°F. In case of insufficient ventilation and/or throug use, explosive/highly flammable mixtures. Contains: Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane.
